Pressurised deaerator solutions

A pressurised deaerator solution holds the key to achieving regulatory compliance, higher energy efficiency and greater process productivity.

PDA Pressurized Thermophysical Deaerator

PDA Pressurised Thermophysical Deaerator series consists of pre-assembled units designed to heat the boiler feed water to a temperature above 100°C.

Pressurised Deaerator Head

Spirax Sarco Deaerator Heads are designed for boiler feedwater treatment applications. They are recommended in order to reduce the cost or the impact of chemical treatment agents and to reduce the amount of dissolved oxygen and carbon dioxide.

Pressurised Deaerators

DH Type Flash Condensing Deaerator Heads

Spirax Sarco flash condensing deaerator head is designed to mix incoming flows of cold make-up, condensate return and flash steam to the boiler feedtank. This mixing action is achieved by directing the downward flow through a baffle arrangement within the unit. This liberates dissolved gases from the cold make-up, which are vented to atmosphere.

PDA Pressurized Thermophysical Deaerator

PDA Pressurized thermophysical deaerators

LC2200 Controller

The Spirax Sarco LC2200 is used to control an electrically actuated valve in response to a signal from a capacitance probe, providing proportional modulating control of liquid levels. It can be used for level control of boilers, deaerators, and tanks.

Feedtanks

Our feedtanks are designed as atmospheric deaerators to increase efficiency and keep ongoing maintenance costs low.

Feedtanks

Our feedtanks are designed as atmospheric deaerators to increase efficiency and keep ongoing maintenance costs low.